Stop and Check your brake

-

Like every other system of the vehicle, brake is the most vital area that you should not overlook. As acceleration is important, deceleration to stop is also important.

The following parts are taken into consideration when doing brake inspection
  • Check brake lining wears
  • Check brake fluid level
  • Check Rotor thickness
  • Check condition of hoses and brake lines
  • Check brake and dash warning lights
Also, taking the car for a test drive to detect other potential brake problems is  important.
A properly operating brake system helps ensure safe vehicle operation and control under a variety of driving conditions. Ensure to check your braking system, at least once a year.
If your car is pulling to one side, left or right, or if you hear odd noises when you apply a brake, inspect them.
Other warning signs are:
  • Illuminated brake warning light
  • Brake grabbing
  • Low pedal feel
  • Vibration when you apply it at high speed
  • Hard pedal feel
  • Squealing
Several factors affect brake wear, including
Used cars for sale here

  • Driving habits, 
  • Operating conditions
  • Vehicle type and
  • Brake lining materials

Never put off routine brake inspection or any needed repair such as "metal to metal" point, which can be potentially dangerous and lead to a more costly repair bill.

Have any braking problem? Consider scheduling an appointment with Dreamland Motor's here to have it diagnosed and repair instantly.

For more tips on "Know Your Car," subscribe Below

Enter your email address:


Delivered by FeedBurner

Comments

Post a Comment

If you have any contribution, pls write it here

Popular posts from this blog

p2185 honda accord 2008

-
Image
P2185 is a trouble code, showing engine coolant temperature sensor 2 circuit is high  2008 Honda Accord  coolant temperature sensor  Click Here to read about coolant temperature sensor of toyota vehicles when the ECU  of the vehicle is not receiving signal from the coolant sensor or the signal reaching the ECU is low, it'll set that code P2185 and pop up the check engine light.  Symptoms of p2185 the only noticeable symptom is the check engine light, at times the engine may run on rich mixture, causing poor fuel economy. Possible causes of p2185 WATCH THE VIDEO sensor being removed blocked or leaking thermostat low coolant level  air bubble in the cooling system bad coolant temperature sensor Possible solution of p2185 check the sensor location and make sure it's not being removed, especially when you replace the radiator. the brand new radiator don't usually come with the coolant temperature sensor but a drain plug. You need to replace the drain...
Read more

How to solve code P0015 and P0017 (Toyota or Lexus) of vehicles having rough idling and hard acceleration

-
Image
When your Toyota or Lexus cars have just started idling rough or not accelerating easily the way it used to be, you plugged in a scanner and found out the codes P0015 P0017 (both current), as shown below. when this happens, the engine-valve timing is altered.  P0015   P0017 how can engine-valve timing be altered even when no body loosed the engine? Most of the new model vehicle are equipped with variable valve timing inlet (VVTi) camshafts, which help adjust the valve timing of the vehicle when operating on certain loads, to help boost the engine performance at that particular instance. then readjust the timing to the normal point on average working conditions.  But when an ECU commanded the VVTi cam gear to return to the normal point and it's not working, this'll prompt the computer to throw the code P0015 or P0017 or both accuring at the same time, with the check engine showing on the dashboard. When the cam gear failed to return to the normal point after adjustment, th...
Read more

How to solve code P0335 Hyundai Elantra 2013-2015

-
Image
Hyundai 2013 model  When the crankshaft position sensor of Hyundai vehicle is failing the ECU always displays code P0335 on its DTC.   Sometimes, this code can be displayed even if the sensor is not faulty, due to the reasons below: ·         When the battery is low and enough voltage is not reaching the sensor Dreamland Motor's ·          When the timing plate is bent or cracked ·          When the timing of the engine is not correct Until the above conditions are met, replacing the sensor might not solve the problem. It’s very important to cross check all the works you did on the engine, or to refer to repair history of the vehicle before going ahead to replace the sensor to avoid wasting money replacing parts that are not faulty. Request a call from a mechanic, by filling a form here , if you have any problem with your hyundai vehicle. you'll only pay after ser...
Read more